Interactive 3D Shower Enclosure Configurator
Rotate it, swing the door, and catch the four problems that end jobs.
- Rotatable 3D model to scale
- Panel cut list with weights
- Eight engineering checks
Live 3D model
3 panels · 3/8 inAnimating — drag to take control and check the arc.
Panels
3
Glass area
50.0 sq ft
Heaviest panel
91 lb
2-person set
Total weight
243 lb
Engineering checks
1 issueHinge load
Door weighs 82 lb. 3 hinges carry it at about 55 lb per pair against a 45 lb rating.
Fix: Narrow the door, drop to 3/8 inch glass, or move to a header-supported design.
Wall blocking
Blocking confirmed behind the hinge wall. Hinges land in framing as they must.
Wall plumb
Walls lean 0.13 in over the height. Within what a wall profile can take up.
Door swing clearance
A 32.0 in door sweeps a 32.0 in radius. You have 36 in to the nearest fixture.
Panel span
Widest panel is 35.5 in against a practical 78 in limit for 3/8 inch glass.
Safety glazing
Shower glazing is a hazardous location under IRC R308.4.5. This build specs 3/8 inch tempered with a permanent etch mark.
Panel handling
Heaviest panel is 91 lb.
Resolve these before ordering glass
Tempered glass cannot be recut. Everything flagged is free to change now and impossible to change once the panels are fabricated.Panel schedule
| Panel 1 — Return35 1/2" x 76" · 3/8 in tempered | 91 lb |
| Panel 2 — Fixed27 3/8" x 76" · 3/8 in tempered | 70 lb |
| Panel 3 — Door32" x 75 5/8" · 3/8 in tempered | 82 lb |
| Total glass | 50.0 sq ft · 243 lb |
Panel sizes are derived from the dimensions you entered using standard fabrication allowances. They are a planning schedule, not a fabrication order — we template the finished opening before any glass is cut, because tempered glass cannot be adjusted afterwards.
Next step
Send us the model you just built
Every panel dimension, the hinge side and all the checks travel with the message. We template against it and come back with a firm quote.
Frameless 90 degree corner enclosure, 60" by 76", 3/8 inch clear
- Enclosure
- 90 degree corner enclosure
- Frame style
- Frameless
- Opening
- 60" wide by 76" tall
- Return depth
- 36"
- Glass
- 3/8 inch tempered, Clear
- Hardware
- Matte black, hinges on the left
- Panel 1 (return)
- 35 1/2" x 76" · 91 lb
- Panel 2 (fixed)
- 27 3/8" x 76" · 70 lb
- Panel 3 (door)
- 32" x 75 5/8" · 82 lb
- Total glass
- 50.0 sq ft · 243 lb
- Wall plumb
- 0.125 in out over the height
- Swing clearance
- 36 in to nearest fixture
- Blocking confirmed
- Yes
- Options
- Protective glass coating
- Checks failing
- Hinge load
Text it to us
Opens your messages app, already written
Email it to us
Opens your mail app with the full spec
Call and read it out
(703) 470-7867 · 24/7 Emergency Service
A render is not a design
Most shower visualisers show a pretty box of glass and stop there. The problem is that none of the things that actually sink a frameless enclosure are visible in a picture. The door weighs what it weighs. The wall leans however much it leans. The hinges have to land in blocking that either exists or does not. And the door sweeps an arc that either clears the toilet or does not.
That is why this model is built from a geometry engine rather than drawn, and why the glass carries its real edge thickness — a half inch build genuinely looks heavier here than three-eighths, because it is. What you rotate on screen is the same data that becomes the cut list.
Why there is no price on this page
Because it would be wrong more often than right. Two openings with identical dimensions can differ by a wide margin once you account for wall condition, access, tile thickness, whether blocking exists, and what the last installer left behind. We would rather hand you an exact specification and quote it honestly than put a number on a screen that we have to walk back on site.
The four that end jobs
- Hinge load. A half-inch door much over 34 inches wide exceeds what a standard hinge pair carries. It sags, then it stops closing on the magnet.
- Blocking. Frameless hinges carry the door into the wall. Tile and backer board will not hold it, and you cannot add blocking after the tile is on without opening the wall.
- Plumb. Past about a quarter inch of lean over the height, the gap tapers visibly and the glass has to be scribed — a decision that must precede fabrication.
- Swing clearance. The arc equals the door width. In a compact bathroom it lands on the toilet surprisingly often, and reversing the hinge side afterwards means new glass.
Questions people ask
Because no two shower openings are the same, and a number on a screen would be wrong more often than right. Wall condition, access, tile thickness, whether blocking exists, hardware availability and the state of the substrate all move the figure, and none of them are visible from a configurator. What you get instead is an exact specification — panel sizes, glass weights, hardware and the engineering checks — which is what a real quote is built from. Send it and you get a firm number rather than a guess.
Keep going
Other free tools that pair well with this one.
Shower Door Designer
Build your frameless enclosure and watch it draw itself to scale.
Open tool True 3D3D Glass Railing Designer
Orbit your deck, balcony or stair railing with the code check running live.
Open tool True 3D3D Patio & Sliding Door Designer
Slide the panel, swing the French pair, see the opening before you commit.
Open tool